Home Button
Order Button
Contact Button
 

Blade Arms | Capacitors | Flywheels | PC Boards | Pull Chain Switches | Wall Switches

Products - Pull Chain Switches

We carry a variety of pull-chain switches that replace many different brands including:
Blue cross, Canal, CEC, Chengye, CSA, Defond, Emerson, Geng Jeng, GTE, Hitco, Hunter, Jeang-YE, JinYon, KTE, Leviton, Levolier, Nutone, Panasonic, PC-A1, Sabre, Safer Enco, Santa, Sears, Shinden, V-SS2L, Well-Tec, Wupin, Yamato-Denbi, You Yan, You Yang, and also Zing Ear. The easiest way to determine the correct switch is to call us with the switch in front of you, also, you will want to leave the wires in the switch and let us know how many wires your capacitor has.

The drawings below depict the metal bands that are wrapped around the plastic cam inside of the switch. To open a Jin-You switch, tap on the side of the switch where the L, 1, 2, & 3 is stamped. Tap in a circle about 1/2" in diameter. The plastic is easy to crack in this spot. Remove the broken pieces and cam from the switch. This cam will be about 5/16" in diameter and 5/16" long if it is a one layer and it will have one metal band wrapped around it. If it is a two layer, it will be about 5/16" in diameter and 5/8" long with two bands. Some two layers have two bands that are about 5/16" x 5/16" each. The same information applies to Zing Ear A09. Remember if all else fails, we are as close as your phone.

Notice: The illustrations below represent the metal contacts (on Jin-You) switches that wrap around the plastic cam. The cam is not illustrated. The complete cam & contacts are illustraetd on the Zing Ear.

Please order by catalog number.

 

Single Layer Pull Chain Switches
  Catalog # Pos.1 Pos.2 Pos.3 Pos.4 Description Cost
A01 OFF ON
L+1
ON L+2 ON L+3

Jin-You - Used in fans with one two wire capacitor or one two wire and one three wire capacitor or one two wire capacitor and a transformer or choke. Black (hot) wire goes in L.

Internal Cam Configuration: Round, made of plastic. Metal contact completely encircles the cam with a 3/16" X 1/4" off-shoot on one side.

$9.95
A03 OFF ON
L+1
ON L+2 ON L+3

Jin-You - Used in fans that DO NOT have any type of capacitor. Example: Two speed Old Tyme Hunter and Classic. Also in all fans with a pull chain reverse switch. Comes with balck, blue and red wires.

Internal Cam Configuration: Round, made of plastic. Metal contact completely encircles the cam with a 3/16" X 1/4" off-shoot on one side.

$9.95
A04 OFF ON
2+1
ON 2+1+3 ON 2+3

Jin-You - Light and fan motor switch for GE, Emerson, Casablanca, Old Jacksonville, Great American, American Industries, Key Largo & others using GE type motors. Comes with black, blue and red wires.

Internal Cam Configuration: Round, made of plastic. Metal contact completely encirlces the cam with an off-shoot that encircles approximately 75% of the cam.

$9.95
A05 OFF ON 3+L+1+2 ON 3+L+2 ON 3+L+1

Jin-You - Used in all fans with only one three wire capacitor. IE 5+8.5, 2+5.5 - black (hot) wire goes in #3, capacitor wires (two on same end of capacitor) go in #1 and #2 of switch. 4th wire goes in L of switch.

Internal Cam Configuration: Round, made of plastic. Metal contact completely encirlces the cam with an off-shoot that encircles approximately 75% of the cam.

$9.95
A08 OFF ON 3+1+2 ON 3+2 ON 3+1

Jin-You - All fans using a three wire, three speed pull chain switch. These fans will have a two wire capacitor 8 or 9UF and a three wire capacitor usually 6+14UF. Comes with black, red & yellow wires.

Internal Cam Configuration: Round, made of plastic. Metal contact completely encirlces the cam with an off-shoot that encircles approximately 75% of the cam.

$9.95
A09 OFF ON
L+1
ON L+2+3 ON L+3

Zing Ear - This switch is found in fans using 3, 4 or 5 wire capacitor with two wires being the same color on one end IE two yellows, two grays or two blacks. One of these two wirew goes in #1 of the switch.

Internal Cam Configuration: Round, made of plastic. Has a ratchet assembly on one end, metal contact encircles approximately 60% of the cam with a 3/16" x 1/4" off-shoot.

$9.95
S3002 OFF ON
L+1
ON L+2+3 ON L+3 This switch has a black plastic body with a flat metal top. The numbers S3002 are stamped in the metal top. The switch has solder lugs out of the plastic body. Numbers L, 1, 2, 4 with #3 to the right by itself. This switch is usually on or wired to a PC Board. $11.95
Two Layer Pull Chain Switches
01 OFF

OFF
ON
L+1
ON
1+2+3

ON L+2
ON 2+3+L

ON L+3
ON 3+L+1

Jin-You - Used in Gulf Coast, some Ricar, Hunter and many others. Gulf Coast and Riccar inserts the balck (hot) wire in the lower #3, Hunter uses top and lower L. (The sequence of operation for the top layer is the same as an A01, the lower layer is the same as an A03).

Internal Cam Configuration: Round, made of plastic. Has two metal contacts, the upper metal contact completely encircles the cam, with a 3/16" x 1/4" off-shoot. The lower metal contact encircles approximately 75% of the cam.

$9.95
02 OFF ON
L+3
ON L+1 1+2

Jin-You - This switch usually has five wires with two blacks installed in the top L and lower #1. This switch is also used with seven wires: two blacks, two yellows, one purple, one gray and one orange. Top and lower layers are the same.

Internal Cam Configuration: Round, made of plastic. Has two metal contacts, each contact encircles the cam approximately 25%.

$9.95
03 OFF ON L+3+2 ON L+3+1 ON L+1+2

Jin-You - This switch will not have two black wires in top L and bottom 1 as the 02, or any combination of this. The black (hot) wire is usually in the lower L or lower #3. Top and lower layers are the same.

Internal Cam Configuration: Round, made of plastic. Has two metal contacts, each contact encircles the cam approximately 75%.

$9.95
LSW-1         Lightkit switches complete with brass knurl nuts. 2 wire, 1 way. 6 AMP. @ 125V A.C. $5.95
LSW-3         Lightkit switches complete with brass knurl nuts. 3 wire, 3 way. 6 AMP. @ 125V A.C. $6.95
Reverse Switches
RVSS6         May be used as a six, four or three wire switch. Voltage Rating 4 AMPS @ 120V A.C. $4.95